服務總機： 傳真： 郵箱：
聯系地址：北京通州區八里橋南街16號京貿國際公寓D座102

日立/牛津 FOUNDRY-MASTER Smart全譜火花臺式直讀光譜儀

SKU: FOUNDRY-MASTER Smart
FOUNDRY-MASTER Smart全譜火花直讀光譜儀適用于鐵、鋁、銅、鎳等金屬樣品的成分分析，根據客戶的具體要求，本銷售協議所對應的儀器的分析范圍為鐵基和鋁基。

FOUNDRY-MASTER Smart臺式直讀光譜儀技術參數

FOUNDRY-MASTER Smart臺式光譜儀可應用于固體金屬樣品的元素定量分析及牌號鑒定。光學系統采用CCD檢測器，光譜范圍覆蓋黑色、有色金屬典型材料，全新數字光源，儀器裝備有氬氣沖洗火花臺，開放式火花臺適合不同形狀和尺寸的樣品分析。

Spectrometer Optical System光譜儀光學系統

  • Flat field Multi-CCD optics平場多CCD光學系統
  • Focal length : 300 mm. 焦距：300 mm
  • Effective wavelength 175 – 671nm. 有效波長范圍：175 – 671nm
  • Pixel resolution 14 pm. 像素分辨率：14 pm
  • Reciprocal dispersion（1st order）. 線色散率倒數(一級)：1.75nm/mm
  • External entrance window, easy access for cleaning or exchange外部入射窗口，方便清洗及更換
  • High stability against outside influences thanks to Peak Position Alignment (PPA).
    實時波長校準功能保證了優異的長期穩定性。
  • Solid, robust technology and compact design allow continuous use in any location, in the lab or on site, even in rugged conditions.
    保證儀器能夠在任何惡劣的環境中持續正常工作，從實驗室到爐前現場，甚至更嚴酷的環境。

Spark Source火花源

  • New digital spark generator with optimized discharge parameters for atomic lines, lowering detection limits of a wide range of elements全新的數字光源，電腦調節最優的火花激發參數，幫助降低元素檢出限
  • High energy pre-spark (HEPS) 高能預燃技術 (HEPS)
  • Computer controlled parameters計算機調節參數
  • Frequency 80– 500 Hz頻率80 – 500 Hz
  • Voltage 250 – 500 V電壓250– 500 V

Argon Flushed Spark Stand氬氣沖洗火花臺

  • Three-sided open sample stand開放式樣品臺設計
  • Jet-Stream-Electrode with low argon consumption低氬氣消耗的“噴射電極”技術
  • Universal adjustable sample clamp通用可調樣品適配器
  • Exchangeable sparkstand plate for individual matrices特殊樣品可更換相應火花臺
  • Air cooled空氣冷卻系統

Computer and readout system (external PC) 計算機及讀出系統（筆記本電腦）

  • Intel(R) i5-5200U 英特爾i5處理器
  • Windows 10 operating systems Windows 10操作系統旗艦版
  • Min. 2.20 GHz and 4 GB Ram 主頻2.20GHz內存4.00GB
  • AMD Radeon R5 M330 顯卡
  • Hard disk  硬盤容量500GB
  • CD-burner CD燒錄功能
  • Multi-channel A/D converter多通道A/D轉換
  • Fire-Wire, LAN Ethernet防火墻，局域網
  • Parallel interface并口
  • Serial (RS 232) Interface系列RS232接口
  • 2 USB Interfaces, 2個USB接口，
  • VGA Video port視頻輸出功能
  • Battery life 5 hours電池續航時間 5個小時
  • External, 14.1 “TFT-LCD–Display 14.1 “液晶顯示器
  • Resolution 1280 * 800 分辨率1280 * 800
  • Weight 1.94Kg 重量 1.94千克

Data Output數據輸出

  • Matrix-, Inkjet-, Thermo- or Laser-printer, all standard printers can be used可接駁各種標準打印設備
  • Storage on disc (or other medium) and transfer to other programs (Excel, PDF) 數據存儲在移動存儲器上或以Excel、PDF形式輸出
  • Network connection via serial or USB-Interface網絡連接通過串口或USB接口

Software軟件

  • Operating system Windows 8 Windows 8操作系統, 
  • spectrometer software WAS光譜儀WasLab操作軟件
  • Optional data maintenance programs 可選數據維護程序

Analytical Functions of Spectrometer Software操作軟件分析功能

  • Type recalibration控樣校正
  • Global or partial recalibration全局或局部標準化
  • Reproducibility check during recalibration and analysis校準和分析時再現性檢查
  • Automatic display of required recalibration- or control samples校準或監控樣品的自動顯示
  • Flagging of results beyond calibration range自動標識超出曲線范圍的結果
  • Input of user-defined sample identity codes用戶自定義樣品碼輸入
  • Automatic or user-controlled printout of analytical results自動或用戶自定義分析結果的打印、存儲及輸出
  • Free editable grade database自定義牌號數據庫
  • Grade-search and identification牌號搜索和牌號鑒定功能
  • Input of user-defined formulas自定義公式輸入
  • Output of analytical results in light quantity intensities, ratios, recalibrated intensity ratios, corrected recalibrated intensity ratios 分析結果可顯示絕對強度、相對強度、標準化強度和校正強度等多種形式
  • Output of analytical results in concentration, mass percentage, mass percentage related to spectral lines 分析結果可用濃度、通道濃度表示
  • 1 or 2 point recalibration單點標或兩點標準化
  • Additive and multiplicative interelement correction干擾校正
  • Matrix correction基體校正
  • Automatic spectral line switching 譜線自動切換
  • Calculation of average, standard deviation and variation coefficient for any number of burns任意激發次數測量結果的平均值、標準偏差及相對標準偏差等計算
  • Automatic hardware diagnostics硬件故障自動診斷
  • Graphical display of spectra 光譜圖形顯示
  • Storage of spectral information for future evaluation譜圖信息存儲

TECHNICAL DATA 技術數據

Dimensions 尺寸:

  • 高：  280 mm  
  • 長：  665 mm  
  • 寬：  415 mm
  • 重量：35 kg

電源要求：

  • 220 V /50 Hz
  • 運行功率700 W  
  • 待機功率50 W
  • 16 A慢熔保險絲

氬氣要求：

  • 99.999%高純氬氣, purity 5.0
  • 進氣壓力3bar,Pressure 3 bar
  • 銅管Copper argon duct , unpolluted (e.g. solder)

 

儀器分析范圍
 
FOUNDRY-MASTER Smart直讀光譜儀鐵基體分析范圍
 
元素 Fe 100 Fe 150 Fe 200 Fe 250 Fe 300 Fe 305 Fe 400 Fe 500 Fe 000
low alloy steel free cutting steel cast iron Cr-Hard/Ni.Resist stainless steel stainless steel + N tool steel high Mn steel Fe-Orientation
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
C 0.003 1.8 0.003 1.8 1.7 5 1 4.5 0.005 2.6 0.005 2.6 0.003 2.6 0.003 1.8 0.005 4
Si 0.003 2.4 0.003 2.3 0.003 6 0.005 7 0.005 4.5 0.005 4.5 0.002 1.5 0.002 2 0.005 7
Mn 0.002 2.5 0.005 2.5 0.003 1.6 0.003 2.4 0.002 18 0.002 18 0.002 2.5 7 22 0.005 25
P 0.002 0.2 0.003 0.15 0.003 0.8 0.003 0.55 0.002 0.17 0.002 0.17 0.002 0.15 0.002 0.15 0.005 0.8
S 0.002 0.1 0.002 0.45 0.002 0.22 0.003 0.25 0.003 0.42 0.003 0.42 0.002 0.15 0.002 0.15 0.005 0.45
Cr 0.003 5.5 0.003 5.5 0.003 2.5 0.005 40 0.002 35 0.002 35 0.002 22 0.003 5 0.005 40
Mo 0.005 1.8 0.005 1.5 0.003 2 0.005 4 0.003 8 0.003 8 0.003 11 0.005 2.2 0.005 11
Ni 0.003 5.5 0.005 5.5 0.005 3.5 0.005 31 0.005 55 0.005 55 0.003 5 0.005 4.5 0.005 55
Al 0.002 1.7 0.002 1.7 0.002 1.4 0.002 0.15 0.002 6 0.002 6 0.005 0.5 0.005 0.5 0.005 6
Co 0.002 1 0.003 0.9 0.002 0.5 0.004 0.3 0.002 13 0.002 13 0.002 13 0.002 0.4 0.005 13
Cu 0.003 1 0.001 0.8 0.003 3.5 0.002 10 0.002 8.5 0.002 8.5 0.001 1 0.002 1 0.005 10
Nb 0.001 1.7 0.003 1 0.002 0.2 0.003 0.5 0.003 3.5 0.003 3.5 0.001 1.7 0.001 1 0.005 3
Ti 0.001 1 0.002 0.5 0.001 0.35 0.005 0.35 0.001 2.3 0.001 2.3 0.001 1 0.001 1.2 0.005 2
V 0.001 1 0.002 1 0.002 0.8 0.005 1 0.001 1 0.001 1 0.002 11 0.001 0.5 0.005 10
W 0.005 2 0.025 2 - - 0.01 0.4 0.01 4 0.01 4 0.01 22 - - 0.025 25
Zr 0.002 0.5 0.005 0.5 0.003 0.06 - - 0.002 0.4 0.002 0.4 - - - - - -
As 0.002 0.1 0.005 0.1 0.002 0.15 - - - - - - 0.002 0.1 - - - -
Sn 0.002 0.3 0.002 0.3 0.003 0.25 0.003 0.25 - - - - 0.002 0.35 0.002 0.15 - -
B 0.0005 0.015 0.0005 0.015 0.001 0.11 - - 0.001 0.015 0.001 0.015 - - - - - -
Ca 0.0005 0.01 0.0005 0.01 - - - - - - - - - - - - - -
Pb 0.001 0.05 0.01 0.35 0.003 0.3 - - 0.003 0.3 0.003 0.3 - - - - 0.005 0.3
Mg - - - - 0.0005 0.125 - - - - - - - - - - - -
Bi 0.001 0.15 0.01 0.15 0.002 0.025 - - - - - - - - - - - -
Zn 0.002 0.025 0.001 0.025 0.002 0.04 - - - - - - - - - - - -
Sb 0.005 0.24 - - 0.005 0.28 - - 0.005 0.24 0.005 0.24 - - - - - -
Se 0.001 0.05 - - 0.004 0.07 - - 0.01 0.4 0.01 0.4 - - - - - -
Ce - - - - 0.002 0.08 - - - - - - - - - - - -
La - - - - 0.001 0.05 - - - - - - - - - - - -
Fe internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

FOUNDRY-MASTER Smart直讀光譜儀鋁基體分析范圍


元素		 Al 100 Al 200 Al 300 Al 400 Al 450 Al 500 Al 000
low alloy Al Al-Cu alloy Al-Mg alloy Al-Si alloy Al-Si-Cu alloy Al-Zn alloy Al-Orientation
Min Max Min Max Min Max Min Max Min Max Min Max Min Max  
Ag 0.001 1.2 0.001 1.2 0.001 1.2 0.001 1.2 0.001 1.2 0.001 1.2 0.001 1.2  
B 0.0005 0.025 0.0005 0.025 0.0005 0.025 0.0005 0.025 0.0005 0.025 0.0005 0.025 0.0005 0.025  
Be 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02  
Bi 0.01 0.7 0.01 0.7 0.01 0.7 0.01 0.7 0.01 0.7 0.01 0.7 0.01 0.7  
Ca 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02 0.0001 0.02  
Cd 0.001 0.4 0.001 0.4 0.001 0.4 0.001 0.4 0.001 0.4 0.001 0.4 0.001 0.4  
Co 0.003 0.5 0.003 0.5 0.003 0.5 0.003 0.5 0.003 0.5 0.003 0.5 0.003 0.5  
Cr 0.001 0.7 0.001 0.7 0.001 0.7 0.001 0.7 0.001 0.7 0.001 0.7 0.001 0.7  
Cu 0.001 0.7 0.001 11 0.001 5 0.001 4 0.001 11 0.001 4 0.001 11  
Fe 0.001 2.2 0.001 2.2 0.001 3 0.001 3 0.001 2.2 0.001 2.2 0.001 3  
Ga 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15  
Hg 0.005 0.08 0.005 0.08 0.005 0.08 0.005 0.08 0.005 0.08 0.005 0.08 0.005 0.08  
In 0.005 0.2 0.005 0.2 0.005 0.2 0.005 0.2 0.005 0.2 0.005 0.2 0.005 0.2  
La 0.001 0.04 0.001 0.04 0.001 0.04 0.001 0.04 0.001 0.04 0.001 0.04 0.001 0.04  
Li 0.0001 0.035 0.0001 0.035 0.0001 0.035 0.0001 0.035 0.0001 0.035 0.0001 0.035 0.0001 0.035  
Mg 0.001 1.5 0.001 1.5 0.001 13 0.001 3 0.001 3 0.001 4 0.001 13  
Mn 0.002 2.2 0.002 2.2 0.002 2.2 0.002 2.2 0.002 2.2 0.002 2.2 0.002 2.2  
Mo 0.001 1 0.001 1 0.001 1 0.001 1 0.001 1 0.001 1 0.001 1  
Na 0.0005 0.035 0.0005 0.035 0.0005 0.035 0.0005 0.035 0.0005 0.035 0.0005 0.035 0.0005 0.035  
Ni 0.003 2 0.003 3.5 0.003 3.5 0.003 3.5 0.003 3.5 0.003 3.5 0.003 6  
Pb 0.005 1.8 0.005 1.8 0.005 1.8 0.005 1.8 0.005 1.8 0.005 1.8 0.005 1.8  
Sb 0.05 0.7 0.05 0.7 0.05 0.7 0.05 0.7 0.05 0.7 0.05 0.7 0.05 0.7  
Si 0.002 1.5 0.002 1.5 0.002 1.5 0.002 28 0.002 28 0.002 1.5 0.002 28  
Sn 0.005 0.3 0.005 0.5 0.005 4.5 0.005 0.5 0.005 4.5 0.005 4.5 0.005 4.5  
Sr 0.0001 0.16 0.0001 0.16 0.0001 0.16 0.0001 0.16 0.0001 0.16 0.0001 0.16 0.0001 0.16  
Ti 0.001 0.3 0.001 0.7 0.001 0.7 0.001 0.3 0.001 0.7 0.001 0.7 0.001 0.7  
V 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15 0.001 0.15  
Zn 0.002 2 0.002 2 0.002 5 0.002 2 0.002 2 0.002 13.5 0.002 13.5  
Zr 0.005 0.25 0.005 0.25 0.005 0.25 0.005 0.25 0.005 0.25 0.005 0.25 0.005 1  
Al Internal standard Internal standard Internal standard Internal standard Internal standard Internal standard Internal standard  

用戶提供標樣，日立分析儀器可現場延長測量上限。 

FOUNDRY-MASTER Smart直讀光譜儀銅基體分析范圍 


元素		 Cu 050 Cu 100 Cu 200 Cu 300 Cu 350 Cu 400 Cu 450 Cu 500 Cu 000
low alloy Cu Cu-Be/Co/Ag Cu-Zn Brass Cu-Sn-Pb Bronze Cu-Sn-Zn-Pb alloys
Gunmetal		 Cu-Ni alloys
white copper		 Cu-Zn-Ni alloys Cu-Al alloys Cu-Orientation
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Ag 0.002 0.3 0.002 1.7 0.002 1 0.002 0.5 0.002 0.1 - - - - - - 0.002 1.2
Al 0.001 1 0.001 0.12 0.002 3 0.001 0.7 0.001 0.5 0.001 0.7 - - 0.001 13 0.001 13
As 0.001 0.5 - - 0.001 0.5 0.001 0.5 0.001 0.25 - - - - 0.001 0.5 0.001 0.5
B 0.002 0.1 0.002 0.1 - - - - - - - - - - - - 0.002 0.1
Be 0.0002 0.6 0.0002 2.6 - - 0.0002 0.25 0.0002 0.25 - - - - - - 0.0002 2.5
Bi 0.003 0.5 - - 0.005 6 0.003 0.5 0.003 7 0.003 0.2 - - - - 0.003 7
Cd 0.002 1 - - 0.0005 0.1 0.003 0.1 0.003 0.1 - - - - - - 0.003 1.3
Co 0.005 1 0.005 3.6 0.005 1.5 0.005 0.7 0.005 0.7 0.005 0.7 - - 0.005 0.3 0.005 3.6
Cr 0.001 1 0.001 0.1 0.001 0.5 0.001 0.7 0.001 0.1 0.001 3.5 - - 0.001 0.5 0.001 3.5
Fe 0.005 1 0.005 0.2 0.005 7 0.005 1.5 0.005 0.75 0.005 3 0.005 1.5 0.005 7 0.005 7.5
Mg 0.0005 0.25 - - 0.0005 0.2 0.0005 0.25 - - 0.0005 0.25 - - 0.0005 0.25 0.0005 0.25
Mn 0.002 1 0.002 0.07 0.002 5 0.002 0.5 0.002 0.5 0.002 1.5 0.002 1 0.002 2 0.002 15
Nb 0.002 1 - - - - 0.002 1 - - 0.002 1 0.002 1 - - 0.002 1
Ni 0.002 1 0.002 0.12 0.005 5 0.002 3 0.002 3 0.002 42 0.002 20 0.002 7 0.002 42
P 0.002 0.7 - - 0.003 0.8 0.002 1 0.002 0.3 0.002 1 0.002 0.1 0.002 1 0.002 1
Pb 0.002 1 0.002 0.25 0.005 5 0.002 25 0.002 10 0.002 1 0.002 0.5 0.002 1 0.002 25
S 0.001 0.2 - - 0.002 0.15 0.001 0.2 - - 0.001 0.2 - - - - 0.001 0.2
Sb 0.005 0.75 - - 0.005 0.6 0.005 0.75 0.005 0.75 0.005 0.75 - - 0.005 0.75 0.005 0.75
Se 0.001 1 - - - - - - - - - - - - - - 0.001 1
Si 0.003 1 0.003 0.2 0.005 7.5 0.003 0.5 0.003 0.1 0.003 1 0.003 1 0.003 0.5 0.003 8.5
Sn 0.002 1 0.002 0.1 0.005 5 0.002 20 0.002 11 0.002 0.5 0.002 0.2 0.002 0.5 0.002 20
Te 0.005 1 - - - - - - - - - - - - - - 0.005 1
Ti 0.001 0.07 - - - - - - - - 0.001 0.07 0.001 0.07 - - 0.001 0.07
Zn 0.005 1 0.005 0.15 0.005 45 0.005 10 0.005 15 0.005 0.5 0.005 30 0.005 1 0.005 50
Zr 0.002 0.06 - - 0.002 0.06 0.002 0.06 - - 0.002 0.06 0.002 0.06 - - 0.002 0.06
Cu Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。 

FOUNDRY-MASTER Smart直讀光譜儀鎳基體分析范圍


元素		 Ni 100 Ni 200 Ni 300 Ni 400 Ni 500 Ni 600 Ni 700 Ni 000
low alloy Monel Nimonic Incoloy Inconel Hastelloy Marmalloy Orientation
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Al 0.005 2 0.005 4.5 0.005 2 0.005 0.5 0.005 3 0.005 0.5 2 7 0.005 8.5
B 0.001 0.05 - - 0.001 0.05 0.001 0.05 0.001 0.05 0.001 0.05 0.001 0.05 0.001 3.6
C 0.002 0.5 0.002 0.5 0.0005 0.5 0.002 0.5 0.002 0.5 0.002 0.5 0.002 0.5 0.002 0.5
Co 0.002 2 0.002 2 0.002 25 0.002 22 0.002 21 0.002 3 0.002 21 0.002 25
Cr 0.002 1 0.002 3 12 33 10 25 10 33 0.002 25 2 25 0.002 35
Cu 0.002 2 22 35 0.002 1 0.002 4 0.002 35 0.002 1.5 0.002 2 0.002 35
Fe 0.005 2 0.005 5 0.005 20 10 45 0.005 50 0.005 25 0.005 3 0.005 50
Hf - - - - - - - - - - - - 0.005 2 0.005 2
Mg 0.0005 0.15 0.0005 0.15 0.0005 0.15 0.0005 0.15 0.0005 0.15 0.0005 0.15 0.0005 0.15 0.0005 0.15
Mn 0.001 2 0.001 3.5 0.001 3.2 0.001 3.2 0.001 3.2 0.001 3.2 0.001 0.5 0.001 3.5
Mo 0.002 2 - - 0.002 10 0.002 8 0.002 12 0.002 36 0.002 5 0.002 40
Nb 0.005 2 - - 0.005 1 0.005 4 0.005 8 0.005 8 0.005 2 0.005 8.5
P 0.005 0.08 - - - - - - - - - - - - 0.005 0.08
Pb 0.005 0.08 - - - - - - - - - - - - 0.005 0.08
S 0.001 0.07 0.003 0.15 0.003 0.15 0.003 0.15 0.003 0.15 0.003 0.15 0.003 0.15 0.003 0.15
Si 0.005 0.5 0.005 7 0.005 2 0.005 3 0.005 2.5 0.005 2.5 0.005 1 0.005 8
Sn 0.005 0.8 - - 0.005 0.8 0.005 0.7 0.005 0.8 0.005 0.7 0.005 0.7 0.005 0.8
Ta - - - - - - - - - - - - 0.01 8 0.01 8
Ti 0.005 2 0.005 1.5 0.005 6 0.005 6 0.005 6 0.005 6 0.005 2.5 0.005 7
V 0.005 1 0.005 1 0.005 1.2 0.005 1.2 0.005 1.2 0.005 1.2 0.005 1.2 0.005 1
W 0.015 1 - - 0.015 3 0.015 3 0.015 5 0.015 13.5 3 13.5 0.015 13.5
Zr 0.005 0.35 - - 0.005 0.35 0.005 0.35 0.001 0.35 0.005 0.35 0.005 0.35 0.005 0.35
Ni internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard internal Standard

用戶提供標樣，日立分析儀器可現場延長測量上限。

注意事項：
儀器成套性與可選購件可參考產品原頁面，本頁只提供儀器核心技術參數。
產品價格均含有商品運費（大陸地區除外）及發票的價格但是不包含工程師上門培訓及調試的費用。
科信不保證網站展示產品的時效性,部分儀器可能已升級,保留最終解釋權。
科信報價：￥0.00